Search Results for: settings

Results 1 - 10 of 26 Page 1 of 3
Results per-page: 10 | 20 | 50 | 100

Speech Engine configuration file explained

Relevance: 100%      Posted on: 2021-02-19

In this article we explain details of the Speech Engine configuration file phxspe.properties, located in settings subdirectory in SPE installation location. Settings in this configuration file affect the Speech Engine behavior and performance. The configuration file is usually created after SPE installation – on first use of phxadmin, a default configuration filephxspe.properties is created in the settings directory. The file is loaded during SPE startup, i.e. you need to restart SPE to apply any changes made in the file. If Speech Engine is used together with Phonexia Browser in so-called "embedded" mode (see details about "embedded SPE" mode in Browser…

SPE configuration

Relevance: 90%      Posted on: 2018-02-02

Basic explanation of configuration directives for SPE with hints & tips. Overview of phxspe.properties for beginners.

Speech Intelligence Resolver v1

Relevance: 80%      Posted on: 2017-05-18

About Phonexia Speech Intelligence Resolver v1 (SIR1) combines the power of speech technologies within a single application. The application automatically performs visualization of the record as well as filtering the speech metadata uncovered from your records effectively. Speech technologies implemented: Phonexia Speaker Identification (SID2) Phonexia Language Identification (LID2) Phonexia Gender identification (GID) Phonexia Voice Activity Detection (VAD) Phonexia Speaker Diarization (DIAR) Phonexia Keyword Spotting (KWS) Phonexia Speech Quality Estimator (SQE) Phonexia Speech Transcription (STT) SIR is a client application cooperating with REST servers. It can be used as a standalone application due to the integrated local REST server. It was…

LID adaptation

Relevance: 80%      Posted on: 2021-03-02

This article describes various ways of Language Identification adaptation. Basic terminology Languageprint (*.lp file) – numeric representation of the audio, extracted from audio file for language identification purpose of (similar to “voiceprint”, but representing the spoken language, not the speaking person) Languageprint archive (*.lpa file) – multiple languageprints combined into single archive Creation of languageprint archives is not supported by SPE, these are supported as input only.   Language model – digital characteristics of a specific language Language model can be trained from languageprints (*.lp), language prints archives (*.lpa), or from combination of both. LID language model should not be…

Browser3 – Releases and Changelogs

Relevance: 70%      Posted on: 2020-10-23

Phonexia Browser v3 (Browser3) is developed as client on top of Phonexia Speech Engine v3. Phonexia Browser is a successor of Phonexia Speech Intelligence Resolver v1 (SIR1). This page lists changes in Browser releases. Releases Changelogs Phonexia Browser v3.35.2, BSAPI 3.35.2 - Oct 21 2020 Public release Fixed: Speaker identification dialog in WaveEditor which did not work for SID4 Fixed detection of certain USB license tokens Phonexia Browser v3.35.0, BSAPI 3.35.0 - Oct 02 2020 Public release New: Compatibility with SPE 3.35 Phonexia Browser v3.30.12, BSAPI 3.30.11 - Aug 20 2020 Public release Fixed: Transcription results intermittently displays words in wrong…

Packages, Updates vs. Upgrades

Relevance: 50%      Posted on: 2018-04-15

Our packages follow the bug-fix /updates / upgrades approach. Some packages are distributed with limited set of speech technologies or without speech technologies. Packages Our software is distributed as ZIP file. Installation procedure is matter of unzipping archive, reconfiguration and start of software. SPE and VIN package contains speech technologies (note: SPE might contain only selected technologies).  PhxBrowser does not contain speech technologies and it needs to be combined with SPE. The software is activated by licensing file. Updates vs. Upgrades Bugfix By bugfix we understand a fix of known problem without changing components or technology models. Bugfix changes only…

Voice Inspector – supporting technologies

Relevance: 40%      Posted on: 2019-06-28

Automatic Speaker Identification (SID) is the most important but not the only Phonexia technology that is implemented in Voice Inspector (VIN). Apart from SID, forensic experts, users of VIN, can benefit from automatic Signal-to-Noise Ratio calculation, Voice Activity detection, Phoneme search, and a Wave editor which incorporates the waveform, spectrum and power panel. Let's have a look on how to utilize individual technologies. Signal-to-Noise Ratio Recording quality can strongly influence the reliability of SID results and so the outcome of a forensic case. Therefore, VIN uses a module of Phonexia Speech Quality Estimation (SQE) to calculate the Signal-to-Noise Ratio (SNR)…

Error 1013: Unsupported: Server does not support authentication with token

Relevance: 30%      Posted on: 2018-12-10

Please check SPE subdirectory ./settings for configuration files. If only phxspe.browser.properties exists, then your Browser uses SPE as embedded component and set inside the file this directive: server.enable_authentication_token = false In that case you can still use SPE with Basic HTTP authentication, as described in documentation, section "Basic authentication" If you would like to play with "pure" daemon installation, then phxspe.properties file should exist in ./settings subdirectory. File phxspe.properties is created by phxadmin utility or can be created from ./data/phxspe.properties.default template file. Copy template file to ./settings directory Rename it to phxspe.properties Check for server.enable_authentication_token directive and setup it as…

How to configure Speech Engine workers

Relevance: 30%      Posted on: 2020-03-28

Worker is a working thread performing the actual files- or realtime streams processing in Speech Engine. This article helps to understand the Speech Engine workers and provides information how to configure workers for optimal performance and server utilization. The default workers configuration in settings/phxspe.properties is as shown below – 8 workers for files processing and 8 workers for realtime streams processing. These numbers mean the maximum number of simultaneously running tasks. # Multithread settings server.n_workers = 8 server.n_realtime_workers = 8 Requests for additional file processing tasks are put in a queue and processed according their order and priorities. Requests for…

SPE3 – Quick Start Guide

Relevance: 20%      Posted on: 2018-04-16

Do you want to run the SPE3 for the first time? This post can help you. Distribution, installation and configuration SPE is distributed by Phonexia in .zip archives. These are downloaded from Phonexia package manager using link provided by Phonexia employee. Installation is done by simple unzipping the content of the downloaded .zip archive to SPE installation folder. Configuration of SPE is done at two places. First is executable file ./phxadmin or .\phxadmin.exe serving to set file to configuration and license files configure speech technologies configure user accounts set up of few various setting Running the ./phxadmin or .\phxadmin.exe command…